Technical information
Specification of Water quality:
PH: 7-8.5
Suspended solids＜10mg/L
Hardness＜60mg/L
Conductivity＜500μA/cm³
Chloride ion: Average＜60mg/L
Sulfate ion＜100mg/L
Iron＜2mg/L
Solubilitysio2＜6mg/L
Dissolved solid＜300mg/L
| DI water cooling system | Cooling | Cooling Tower for DI water cooling system （Prepared by customers） | Capacity of water tank | |||
| Water flow of pump | Power output of Pump | Lift of pump | Water flow of cooling tower | |||
| BKL-250-4.0 | Power unit & Heater | ≥15m3/h | 4KW | ≥22m | ≥10m3/h | ≥5 m3 |
| BKL-250-7.5 | Power unit & Heater | ≥25m3/h | 4KW | ≥22m | ≥16m3/h | ≥10 m3 |
Feature
• The use of DI water ensures non-scaling and non-clog in water pipe.
• Stainless steel DI water tank and connector avoid rusting
• Small space required, easy to move
• Low energy loss, operation is simple and reliable.
Specification
| Model | BKL-250-4.0 | BKL-400-7.5 |
| Cooling capacity | 51600Kcal/h | 155000 Kcal/h |
| Water flow | 9-18 m3/h | 20-42 m3/h |
| Power of water pump | 4.0KW | 7.5KW |
| Water capacity of tank | 250L | 400L |
| Outside diameter of outlet cooling water | DN40(Quick coupler) | DN65(Flange) |
| Dimension | 1300× 870× 930 (mm) | 1550× 1000× 1050 (mm) |
| Noise | ≤70 dB(A) | ≤70 dB(A) |
| Ambient temperature | 8～40℃ | 8～40℃ |
Installation (For reference only)
| Model | DI water cooling system | Cooling | Cooling Tower for DI water cooling system （Prepared by customers） | Capacity of water tank | |||
| Water flow of pump | Power output of Pump | Lift of pump | Water flow of cooling tower | ||||
| MFP-100D2 | BKL-250-4.0 | Power unit & Heater | ≥15m3/h | 4KW | ≥22m | ≥10m3/h | ≥5 m3 |
| MFP-160D2 | BKL-250-7.5 | Power unit & Heater | ≥25m3/h | 4KW | ≥22m | ≥16m3/h | ≥10 m3 |
| MFP-250D2 | BKL-250-4.0 | Power unit | ≥30m3/h | 5.5KW | ≥22m | ≥25m3/h | ≥15 m3 |
| BKL-400-7.5 | Heater | ||||||
| MFP-350D2 | BKL-400-4.0 | Power unit | ≥40m3/h | 5.5KW | ≥22m | ≥32m3/h | ≥15 m3 |
| BKL-400-7.5 | Heater | ||||||
| MFP-500D2 | BKL-250-4.0 | Power unit | ≥55m3/h | 7.5KW | ≥22m | ≥45m3/h | ≥20 m3 |
| BKL-400-7.5 | Heater | ||||||
| MFP-600D2 | BKL-250-4.0 | Power unit | ≥65 m3/h | 9.2KW & 11KW | ≥22m | ≥55m3/h | ≥25 m3 |
| BKL-400-7.5 | Heater | ||||||
| MFP-750D2 | BKL-250-4.0 | Power unit | ≥80m3/h | 9.2KW & 11KW | ≥22m | ≥70m3/h | ≥30 m3 |
